|
|
|
Cable Processing
> Cut Strip & Terminate |
| |
|
+ Click
for larger view
|
| Artos
MTX-10 / Double End Wire Crimping |
Description
|
|
The MTX Series 10 is the latest
member of the Artos family of fully
programmable, multi-task wire
processors. By extending each swing arm on our base model, Artos has made
room for a fourth processing station on each side of the worktable. This design enhancement allows for a total of eight possible processing steps on each end of your wire – an incredible
achievement in automated wire processing. Whatever processing stations you choose, Artos will custom design a Series 10 model to take on your toughest applications with
precision, speed and power. Inside each MTX, six highperformance,
brushless servo motors help deliver wire to your various processing stations quickly and efficiently for cycle speeds of up to 4500 pieces per hour. “Closed-loop” encoders communicate back to the motors to verify all operations, assuring
quality operation. Two swing arms automaticallymove into optimum reference position at the various stations for insertion, rotation and height. The unit’s ball-screw driven cutterhead cuts and strips wire with optimum precision and provides years of reliability.
|
Specification
Wire Sizes –
0,22 to 6mm2 (24 to 10 AWG)
Other sizes are possible
depending on wire type
Wire Lengths –
51mm to 100M (2" to 325')
Shorter wires are possible with
special tooling
Strip Lengths –
0 to 16mm (0 to 0.630")
Longer strip lengths are
possible with additional tooling
Electrical Requirement –
208 to 480 Volt, 3 Phase,
50 or 60 Hz
Air Requirement –
2.4 l/sec.@ 6 Bar (5 CFM @ 80 PSI)
Production Speeds –
Will vary depending upon
application
Dimensions (LxWxH) –
w/2M Collector: 4030mm x
2050mm x 1840mm
(159 in x 81 in x 73 in.)
Height with guard open:
2900mm (114 in.)
Shipping Weight –
MTX 10 w/2M Collector:
2500kg (4500 lbs.)
|
|
|
|
| |
|
|
