|
|
|
Cable Processing
> Cut Strip & Terminate |
| |
|
+ Click
for larger view
|
| Artos
STX / Double End Wire Crimping |
Description
|
|
The STX is engineered to deliver optimum, cost-effective performance in dedicated
applications. Six brushless servo motors provide fast, precise control over most
processing functions, including: wire feeding, wire stripping and wire end of core
placement. This ensures the best possible combination of reliability, output and
precision, with cycle speeds of over 4,500/hr.
A belt-driven feed system (with length verification through a separate encoder)
assures accurate cutting lengths and insulation integrity. In-process inspections
ensure quality stripping and crimping. And finally, closed loop servos provide
feedback on end-of-core positioning movements.
|
Specification
Wire Sizes –
0,22 to 6mm2 (24 to 10 AWG).
Smaller sizes may be possible
depending on wire type.
Wire Lengths –
51mm to 100M (2” to 325’). Shorter
lengths possible with special tooling.
Strip Lengths –
0 to 16mm (0 to 0.630”). Longer
strip lengths may be possible with
additional tooling.
Electrical Requirement –
208 to 480 Volt, 3 phase, 50 or 60 Hz.
Air Requirement –
2.4 l/sec. @ 6 Bar (5 CFM @ 80 PSI).
Dimensions (LxWxH) – with passive
collector: 3556mm x 1730mm
x 1840mm (140” x 70” x 73”).
With 4M collector: 5850mm x
1730mm x 1840mm (230” x 70” x 73”).
Height with guard open:
2900mm (114”).
Shipping Weight –
STX with EPS2010 crimping station:
|
| Price: |
|
| Availability: |
Backorder |
|
|
| |
|
|
